Right now megahiperultrafantas and Psmaniaco posted http://www.elotrolado.internet/hilo_desvelado-recasar-controladoras_1588866 and a video clip on Spanish website Elotrolado (linked over) on how to remarry PS3 Blu-ray Disc (BD) drives to other consoles.
To quote, roughly translated: “We are the great ultra hyper Mega Team. We have modified. Self and created out of the question… The way to solve the difficulty the reader is:
Very first, downgrade to firmware two.30 (you know how), then we launch the console typically (therefore leaving the services just before) and set the time, date, language and other people.
2nd: Go again to get started the services mode.
In the stick, unzip the contents of the zip in the root of this.
Place the USB flash drive in the much right and flip on the PS3… will see some thing new on display, when you see that tends to make drive init blue with a circle on the correct is that it has been restored important in the reader.
We allow you reinstall the two.30 and also is configured to read all the films on bluray region totally free.
Exit the support mode (with the lv2diag FILE two) and we have all set the reader by reading through the video games, besides if we have the laser damaged.
Well, from here on out if you crack a controller bluray or ps3 you have two, a person with a broken player and one with the ruptured plaque, you can trade it and function the reader, this is the actual lv2diag.self, who points in show all, it goes black and is waiting for us with out knowing what occurs (the producer_updater_for_reset.self) I hope you like assist and greetings to all of us!!
PS: Do not shell out much more to Sony for that you have damaged the reader (considering that they can be produced inoperable and not repairable with a reinstall of the firmware and the new consoles give one particular year guarantee …)
PDD: The critical is stored on board and sent to the controller.
Needed files which ought to be in the root, search the Internet… previously been leaked…
* Lv2diag. C48E5EBFC00ABD89094CB73A2B0BEA59 self MD5
* MD5 manufacturing_updater_for_reset 90168C03B217CE775A7839D87BBFF2A3
* Fdm_spu_module. 9BDE16660221042A4440ED2C053A139E self MD5
* PS3UPDAT. PUP
* cfg (folder)
Very good guys, I deliver you news that you have comforted people who messed controller or one particular that is not yours.
Executing some testing (edited at the request of the person) we have managed to hyperlink a controller to a diverse important to a plate of sixty GB with the result that the controller has been recorded in the key chip essential plate and ended up married once more recovering the execution of homebrew purposes and video games will retain you knowledgeable of the topic.
Video of the method:
Subsequent up, Max1985 from DemonHades shared the leaked bundle which contains a modded lv2diag.self file that permits consumers to remarry a PlayStation 3 Blu-ray drive board on an additional PS3 console.
Lastly, http://psx-scene.com/discussion boards/776138-post2.html has manufactured a information on remarrying PS3 BD boards to other consoles, as follows:
Women & Gentlemen finally we can remarry BD boards to various consoles. The file was just posted more than at DemonHades by a person of the members (max1985) Place these onto a blank usb stick (not the devusb folder, just it’s contents) & add a two.30, or perhaps other edition PUP file. Set in the servive mode dongle and get into factory service mode. Place the freshly developed USB stick into port (closest to the reader) and run.
I have not carried out considerable testing but, but have just remarried a BD board from a 60gig launch to a 40gig console.
Hyperlink to files: http://www.megaupload.com/?d=XXVD4YK6
Just before you get started, make positive you are at or beneath 3.fifteen. If you have three.fifty five put in, you will need to have to use the modified 3.fifty five downgrade files initial, then downgrade to 3.15 or decrease and then ultimately get started the process.
1. It would seem that older 256meg nand Ps3′s will need to goto two.30. Newer 16meg nand Ps3′s really should be good from 3.15
2. Modify your dongle to “Factory Service Mode”
3. Copy files from the folder downloaded above (the contents of the devusb folder) to the root of a blank usb stick
4. Duplicate the PS3UPDAT.PUP from three.15 (or reduced if your technique can cope with it) to the USB stick
5. Put the USB stick into the ideal aspect USB port on the PS3
6. Place the Dongle into any other port (furthest left is greatest)
7. Ability off the PS3 utilizing the ability swap at the back
8. Flip the power back again on
9. Press power then eject inside .two seconds
10. Wait until finally the PS3 turns off then press the power button on the front once more.
11. The USB will now begin to flash and do a “Drive Init” then set up the PUP file.
12. The process will turn alone off once more.
13. Energy on and play a BluRay film till the film commences.
14. Eliminate Dongle and Usb Stick then insert “Exit Lv2diag” stick (aka Lv2diag file 2) into the exact same port it just was in the Ps3 (furthest to the proper)
15. Press ability to exit “Factory Services Mode”
Update: It would seem that older 256meg nand Ps3′s want to goto two.thirty. Newer 16meg nand Ps3′s should be fine from 3.15
Update #two: I have a USA console right here (I am in Aus) and it is not restoring BD playback. Model is original launch 20gig. This will be a get the job done in progress and consider to figure it out. In a nutshell, some drives might not get BD playback but will be able to play games and many others and so on.