Possible PS3 Downgrade from 3.56 to 3.55 Jailbreak?

Share/Bookmark

Sony has launched 3.60 firmware patch. This update apparently disables firmware updates from a exterior gadget and has reportedly banned “Jailbroken” from the Playstation Network. The following has NOT been tested or reported to operate for downgrading from OFW 3.60.

There is a way to downgrade your PS3 firmware from edition 3.56 to 3.55 or reduce. Ironically, I did find a operate all around that I have however to personally verifiy, where you essentially brick (corrupt your PS3 boot software package) and then force it to the company screen employing a special LV2 file. This enables you to downgrade your firmware.

I have had a number of reviews of this doing work with the PS3 slim productively downgrading to the Sony 3.55 firmware but I personally have had concerns acquiring my older edition two PS3 to basically brick only currupted difficult generate that I get forced to reformat.

I am nevertheless doing work on finding some video clip and photos to publish. I will publish the outcomes. Be positive to backup your PS3 on to external tricky drive ahead of making an attempt. Delighted bricking.

PS3 firmware downgrade tutorial – Attempt at your personal Threat

NOT Responsible for any troubles you may result in to your PS3

I HAVE obtained reports that this procedure can get your PS3 caught in company mode – be warned.

Summary: Force your PS3 booting software program to be corrupted (brick your PS3) and as a result invoke the console support screen.

You will want these files:

Download DownGrade.rar (http://net4geeks.com/DownGrade.rar)

You will also require a Unique Firmware of your selection (i.e 3.55 OFW) – Research for a torrent to get this file.

Bricking Techniques

Important: Prior to you start to attempt to brick your PS3, I propose removing your authentic PS3 tough generate and putting in a separate generate.

To install a new tricky generate, you will need to have to initially re-install 3.56 working with Sony’s authentic firmware (help save the update file you utilized for later), set up the harddrive, and operate a format/restore making use of the update file you saved

If you really don’t you will get a Info Corrupt 8002F225 error, even with the correct three.56 firmware downloaded from Sony will give you this 8002F225 error no issue how a lot of occasions you check out. This helps make it nearly not possible to brick and you are stuck. My guess this is the bug that Sony fixed with “3.56v2″. At least if you have your authentic PS3 difficult generate, and your PS3 will even now be practical if you plug it back in. That stated, I’m not confident this approach of downgrading operates for three.56v2.

If you did operate into this concern, you will probable need to have to install a modchip, manually patch your firmware and flash manually.

#one.) Whilst Installing firmware, (Not downloading) Unplug the ability cord from the PS3. This could get from 1 check out to 10000 trys. It’s all about what design PS3 you have. The older, the much more less difficult.

#two.) Develop a backup, and even though it is formatting, unplug your electrical power cord from the PS3. This way is additional less difficult then the FW update method.

#three.) Restore your PS3, though it is restoring, yank that power cord.

#four.) PS3 tough generate corrupt on you? Restore default settings and yank that ability cord after all over again, and say “Hi” to that good bricked display of yours.

#six.) Format your PS3, and while it’s formatting, yank that ability cord.

Sure, I know you Can’t get out of provider mode on 3.55 and up. But this DOES NOT enter support mode originally. Your PS3 is bricked, and the Lv2 forces support mode later on, because of to the truth that your PS3 is bricked.

This WILL Operate on three.56. You can downgrade to ANY firmware, if you have successfully bricked your PS3. YOUR PS3 is NOT BRICKED if you get any other error or recovery display. This will not perform if your PS3 is not BRICKED. If you are caught, this is wherever you re-set up your authentic PS3 hard generate and every thing will be operating yet again.

How do you know when your PS3 is bricked?

#one.) You turn your PS3 on, and you have a black display screen.
#two.) You flip your PS3 on, and it freezes.
#3.) You flip your PS3 on, and it does practically nothing.

THIS WILL NOT Lead to YLOD. YLOD is a hardware malfunction (Yellow Light of Death). Your PS3 overheated and was because of for the YLOD. Bricking is ALOT different then YLOD.

To begin, this is RISKY. I am not responsible if something goes wrong. Sticking a USB unit into the proper-most port on your USB port shouldn’t be that hard to do.

You really should generate a backup, (use an exterior USB Generate for this) it will protect against all your saves from becoming deleted, your music, pictures, and other products and so on. to be protected.

To generate a backup, insert a USB unit into the USB port onto your PS3. Navigate to Program Settings–>Backup Utility–>Back Up–>Yes

To restore your backed up files back on your PS3, navigate to Method Settings–>Backup Utility–>Restore

To employ the approach of downgrading, you should force a brick on your PS3. Do not worry, this will unbrick your console as nicely. If you conclude up with a corrupted challenging generate, you will have to set default settings.

Step 1.) Download the files needed above.

Step two.) Format a USB system to fat32. Make confident their is nothing at all on the USB unit, or this will not operate. Extract the lv2 file from folder one, and place it on your USB device along with the Firmware you selected.

Stage three.) Insert your USB system into the Correct-Most USB port on your PS3. (Closest to the Disc Reader.) Turn your PS3 on, and your display screen will be black. Wait for a small bit, and your PS3 will turn alone off. If it fails to turn off inside 25 minutes, turn it off manually.

Step four.) Flip your PS3 back on, and you’ll see the recovery menu. The moment you know you see the recovery menu, go ahead and flip your PS3 off. Now, unplug the USB device from the PS3, and insert it into the USB port onto your Personal computer. Erase anything off of your USB. Extract the lv2 file from folder 2 and place it on your root of your USB device.

Action 5.) Insert your USB gadget back again into the Right-Most USB port. Now, flip your PS3 on, it will be unbricked with the firmware you selected to place on the USB generate in action 3.

Good luck.