First Cyprus PS3 Jailbreak Using Palm Pre
The following steps are to set ur palm pre with the PSFreedom. Step 1: Open up Preware (or whatever package application manager you use) and download the app Terminal. Step 2: Download the file called psfreedom.ko Step 3: Plug your phone (Pre or Pre Plus–it doesn’t matter) to your computer and enable usb mode. Step 4: Copy the psfreedom.ko file to the ROOT of your phone. Step 5: Eject your phone and reboot it. Step 6: Open up the Terminal app and type the following: insmod /media/internal/psfreedom.ko Step 7: Press enter. If it gives an error about a file being busy, just retype it and press enter again. Step 8: If successful, another line should appear. Step 9: Now turn the switch in the back of your PS3 off (or unplug the cable if you have a slim) and then flip it back on (or plug the cable back in). Step 10: Plug your phone into the first usb port. Turn on the console and immediately afterwards press eject. Step 11: If you did it right the PS3 should take a little longer to boot. Now check the game column and you should see two new icons. Step 12: Download the backup manager–Google it, I am not providing it. And place the manager.pkg file onto the root of any usb flash drive. Step 13: Plug it in to any available usb port and open the Install Package Files icon on the PS3. Step 14: After installing it, simply back out and open the newly installed program. Step 15: If a disc is inserted you should see the title on the screen. Press circle to backup to an external …